ACOM 1011 - Hamradioguide

Go to content
Amplifiers ▪ Tubes ▪ HF
        ACOM 1011                     Price no Tax ±: 1.500 €              updated may 2016
Frequency coverage, included Warc (MHz) 1.8-29.7MHz (10 and 12m locks provided for FCC)
Power PeP HF (SSB/CW in W) - HF Rtty, digital mode, FM, - and VHF 700W (500W continous)
Power Pep VHF (SSB/CW in W)
Power input (W) - Power out Low, Medim, High 50-70W for full power
Change band Auto
Alc Yes
Alphanumeric Display (W, A,band, T°, R.o.s. alarms, ect.) and/or Bar display and/or analog instrument The upper LED bar-graph always reads peak forward power while the lower LED bar-graph is for the reflected power. LED warning indicators are provided for abnormal conditions of grid 1, grid 2, and plate parameters.
- CAT (Icom, Yaesu, Kenwood, ect.)
Power Tube type 2 x 4CX250B (7203)ceramic metal tetrode tube
Low pass filters
Harmonic suppression (less..); Harmonic 3' Order Suppression -50dB
Remotely Controllabl
Automatic Tuner, time, banda Ros
Insertion loss with/out ATU
TX SO-239/RX SO-241 1 SO239
Interface (I/O, …)
Cooling fans(dBmax) Yes
Power supply 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps), +10% -15% tol.), 50-60 Hz, single phase, 1200 VA.
Type circuit power supply; Maximium Power
Compliance; preparing different market The amplifier can be shipped with 10 and 12-meter capability disabled as required by the FCC
Kit (Cables. bag, Software...)
Size (WxHxD,cm) 406x315x150mm (16x12.4x5.9")
Weight (kg) 18kg (39.7lb)
Microprocessor controll
Availability Accessories
Notes warm up only 30s.
Marketing year beginning 2010
Back to content